Caring for and installing an LCD projector bulb

The lamp of LCD projectors is among the most important parts of the projector. It is also a part that needs to be repaired quickly as it is vulnerable and is easily damaged. This article tells you how you can look after your projector lamp well and expand its lifespan.

Check the brightness

Although, bright pictures look good, you can increase the lifespan of your projector bulbs by turning down the power when it is not needed. If you reduce the power of the projector, your light bulbs will last longer. Also, you can save on your electric bills by reducing the power of the lamp.

Check the fan

Always check if the fan of the projector is working. The major purpose of a fan is to cool the light bulbs, and that’s why you should periodically keep checking if the fan is in good condition. If it is not working, it will reduce the lifespan of the projector. Since projector bulbs are expensive and difficult to replace, knowing how to handle them well can expand their lifespan and will provide relief to the users.

Do not move the projector too much

Moving the projector when it is in use is not a good idea. This is because when you move the projector when is switched on, heat gathers inside the projector. Also, when you shift it when the bulb is hot, it has a very good chance of bursting. The best solution for this is to find a good place for your projector and keep it there as long as possible. Protect from dust
However, if you have to move it, wait until the bulb is cooled down. Make sure that you keep the filter and projector clean. This is because a clean filter quickly cools down the projector. So, you should do everything to keep the filter clean and make sure that it does not gather dust. This will ensure a longer life for the bulb of your projector.

Protect from sunlight

Keep your projector hidden from the sunlight. Temperature is a vital factor that decides the lifespan of a projector. If you are moving a projector, make sure that you do not leave the projector in the backside of the car. Also, the lamp should be allowed to cool after usage.