How to set up a network?
Networking is a process of connecting more than one computer with each other in a network. It is an advanced field which is in huge demand in different fields and places around the world. Networking may be a complex procedure but, with proper guidance and assistance, you can easily set up a network at your home or work place.
/wedata%2F0024654%2F2011-06%2FLinux-Entertainment-Screen-Crash.jpg)
Procedure
If you have more than one computer at your home and you want to share resources like internet or printers between the computers, then networking is your answer. Here are certain simple steps that will assist you in setting up a network at home.
Steps for the setting up of network
Firstly, you will have to set up a network for each computer you want to connect. This is because a network adapter enables a computer system to connect to a network. That is why it plays a very important role in a PC networking procedure.
Installing the network
The most commonly used adapter is an Ethernet adapter and nowadays these are pre-installed in the system by the manufacturers itself.
You will have to get category 5e cables to connect the computers with each other using the Ethernet adapters. 5e cables are pretty much similar to RJ11 US telephone cables, except the 5e cable is a bit wider in size.
Finding the switch
After arranging the adapter and cables, you have to get a switch or a router that can connect all the computers together on a network with the 5e cables.
A normal switch has the capability to connect at least four computers at a time and some expensive devices can even connect more than 20 systems.
Conclusion
After you have made all the necessary arrangements, it is time to plug in the computers to the switch using the 5e cables. However, there is a need to make sure that all the systems are equipped with Ethernet cards. As there are different operating systems available, so there can be difference in the procedure to connect the systems with each other on the Linux network. Therefore, the easiest way to start the process on any operating system is to restart the system on any network. Following these simple steps can assist you in connecting different systems on a network. Enjoy networking!