Not yet registered? Create a OverBlog!

Create my blog

How to remove black mold?

The problem of mold can stick to your home forever if it is not treated as soon as possible. Treating mould needs proper knowledge. This article will tell you the causes of mold, how to remove black mould and tips of keep your home free from it.

Methods

Overview
You have to deal with serious moulds if your house is located in humid place or if it has water leakage problems.
The most problematic mould, which is very hard to get rid of, is black mould.
Black mould is highly toxic in nature and can even cause sickness, which may lead death.
To make your home safe from black mould, you need to remove it properly using various methods. How to kill mold
The first thing to do before removing black mould, is to remove moisture.
Mould occurs in wet and damp conditions due to flooding, water leak, humidity, among others.
Conditions like slow leaks or leaks behind the wall invite humidity.
To remove mould, first seal the mould contaminated room with heavy sheets of plastic in vents, windows, doorways, and openings.
Seal the room with duct tape so that no leeway can be left for the mould to escape. Other tips
Use a strong soap and a sponge to wipe visible mould.
If the mould-contaminated area is dry, then damp it with water for removing it easily. Use disinfectant to kill adamant mould spores.
Thoroughly clean the areas that had visible mould and other infected areas.
You can also use bleach instead of disinfectant, but be careful, it may discolour the surface or material.

Important tips

Points to consider
Moulds are easily spread through dust while you clean home.
Always put an exhaust fan near the door in order to throw the mold out of the house. Dampening dry mould lessens the chance of mold drifting.
Properly dispose off the mould, the sponges, and other material that have been exposed to mould, in garbage bags. Conclusion
Mold requires a day to germinate and grow.
Therefore, even if your house is completely mold free, you need to take extra care if your house has leakage problems. These tips can also help you remove mold on drywall. You may try to read research mould pictures to facilitate black mold detection.

Same category articles Do-it-yourself & Construction

A guide to install a dryer vent

A guide to install a dryer vent

Whether it's a gas or an electric powered dryer, the processes and steps involved in installing vents remain the same. Installing vents requires you to have the right set of tools and also the ability to measure accurately. This article will provide a guide to install a dryer vent.
The benefits of torsion springs

The benefits of torsion springs

Torsion springs refer to a type of vehicle suspension which uses a bar rather than a coil spring to bear the weight of the vehicle and its load. It is mainly used on larger vehicles like trucks and sports utility vehicles. In order to compensate for the difference in the weight of different types of vehicles, the spring manufacturer usually adjusts the ride height by changing the torsion bar.
How to repair a shower door seal

How to repair a shower door seal

Shower door seals keep water inside the shower, and prevent water to damage surrounding areas. The rubber seal becomes cracked over time, and less effective at preventing water damage. Fortunately, it is easy to repair a shower door seal by simply replacing it completely. You can replace the seal within a few minutes and is an easy do it yourself project.
How to build a home?

How to build a home?

A home offers more than safety and shelter to us. It is also a symbol of unity and happiness for your family. A great home is a great investment for your future because you can always sell it one day. But how do you build a home? Here are some steps that you need to follow.